This lesson is still being designed and assembled (Pre-Alpha version)

Introduction to Workflows with Common Workflow Language

Introduction

Overview

Teaching: 0 min
Exercises: 0 min
Questions
  • What are computational workflows, and why are they useful?

  • What is Common Workflow Language?

  • How are CWL workflows written?

  • How do CWL workflows compare to shell workflows?

  • What are the advantages of using CWL workflows?

Objectives
  • Recognise the advantages of using a computational workflow

  • Understand why you might use CWL instead of a shell script

Computational Workflows

Computational workflows are widely used for data analysis, enabling rapid innovation and decision making. Workflow thinking is a form of “conceptualizing processes as recipes and protocols, structured as workflow or dataflow graphs with computational steps, and subsequently developing tools and approaches for formalizing, analyzing and communicating these process descriptions”1. Distinct from general business workflows, computational workflows have their primary focus on data and dataflows. The workflow managers which are designed for such computational workflows should aid their users with this focus. The helpful properties that an ideal computational workflow would possess, to make this possible, are summarised below.

Handy Properties of Computational Workflows2

Composition & Abstraction

Using the best code written by 3rd parties
Handle heterogeneity
Shield Complexity & incompatibility
Sharable reusable, re-mixable methods
Sharing & Adaptability

Shared method, publishable know-how
BYOD / parameters
Different implementations
Changes in execution infrastructure
Automation

Repetitive reproducible pipelines
Simulation sweeps
Manage data and control flow
Optimised monitoring & recovery
Automated deployment
Reporting & Accreditation

Provenance logging & data lineage
Auto-documentation
Result comparison
Scalability & Infrastructure Access

Accessing infrastructures, datasets and tools
Optimised computation and data handling
Parallelisation
Secure sensitive data access & management
Interoperating datasets & permission handling
Portability

Dependency handling
Containerisation & packaging
Moving between on premise & cloud

Computational workflows, and their managers, should abstracting away complexities of the underlying computational environment. Doing so enables the use of heterogeneous tools provided by multiple third parties, as well as the scalability and portability of the workflows, so users can make use of the resources available to them. The workflow manager should make easy the automation, monitoring and provenance tracking of the dataflow. In addition the computational workflow should be in a shareable format, published with open access. These features all will contribute to any data produced using the computational workflow being FAIR (Findable, Accessible, Interoperable, and Reusable)3.

However as the rise in popularity of workflows has been matched by a rise in the number of disparate workflow managers that are available, each with their own standards for describing the tools and workflows, reducing portability and interoperability of these workflows. The Common Workflow Language (CWL) standard has been developed to address these problems, and to serve the general computational workflow needs described above.

Common Workflow Language

CWL is a free and open standard for describing command-line tool based workflows3. These standards provide a common, but reduced, set of abstractions that are both used in practice and implemented in many popular workflow managers. The CWL language is declarative, enabling computational workflows to be constructed from diverse software tools, executing each through their command-line interface.

Previously researchers might write shell scripts to link together these command-line tools. Although these scripts might provide a direct means of accessing the tools, writing and maintaining them requires specific knowledge of the system that they will be used on. Shell scripts are not easily portable, and so researchers can easily end up spending more time maintaining the scripts than carrying out their research. The aim of CWL is to reduce that barrier of usage of these tools to researchers.

CWL workflows are written in a subset of YAML, with a syntax that does not restrict the amount of detail provided for a tool or workflow. The execution model is explicit, all required elements of a tool’s runtime environment must be specified by the CWL tool-description author. On top of these basic requirements they can also add hints or requirements to the tool-description, helping to guide users (and workflow engines) on what resources are needed for a tool.

The CWL standards explicitly support the use of software container technologies, helping ensure that the execution of tools is reproducible. Data locations are explicitly defined, and working directories kept separate for each tool invocation. These standards ensure the portability of tools and workflows, allowing the same workflows to be run on your local machine, or in a HPC or cloud environment, with minimal changes required.

RNA sequencing example

In this tutorial a bio-informatics RNA-sequencing analysis is used as an example. However, there is no specific knowledge needed for this tutorial. RNA-sequencing is a technique which examines the quantity and sequences of RNA in a sample using next-generation sequencing. The RNA reads are analyzed to measure the relative numbers of different RNA molecules in the sample. This analysis is differential gene expression.

The process looks like this:

Diagram showing a typical RNA sequencing workflow. The workflow is linear, starting from taking biological samples and sequence reads, through quality control and trimming steps, to mapping to a genome and counting gene reads, to finally carrying out statistical analysis to identify differentially expressed genes.

During this tutorial, only the middle analytical steps will be performed. The adapter trimming is skipped. These steps will be done:

The different tools necessary for this analysis are already available. In this tutorial a workflow will be set up to connect these tools and generate the desired output files.

  1. M. R. Gryk and B. Ludäscher (2017): Workflows and Provenance: Toward Information Science Solutions for the Natural Sciences. Library Trends. https://doi.org/10.1353/lib.2017.0018 

  2. C. Goble (2021): FAIR Computational Workflows. JOBIM Proceedings. https://www.slideshare.net/carolegoble/fair-computational-workflows-249721518 

  3. M. Wilkinson, M. Dumontier, I. Aalbersberg, et al. (2016): The FAIR Guiding Principles for scientific data management and stewardship. Scientific Data. https://doi.org/10.1038/sdata.2016.18  2

Key Points

  • CWL is a standard for describing workflows based on command-line tools

  • CWL workflows are written in a subset of YAML

  • A CWL workflow is more portable than a shell script

  • CWL supports software containers, supporting reproducibility on different machines


CWL and Shell Tools

Overview

Teaching: 0 min
Exercises: 0 min
Questions
  • What is the difference between a CWL tool description and a CWL workflow?

  • How can we create a tool descriptor?

  • How can we use this in a single step workflow?

Objectives
  • describe the relationship between a tool and its corresponding CWL document

  • exercise good practices when naming inputs and outputs

  • understand how to reference files for input and output

  • explain that only files explicitly mentioned in a description will be included in the output of a step/workflow

  • implement bulk capturing of all files produced by a step/workflow for debugging purposes

  • use STDIN and STDOUT as input and output

  • capture output written to a specific directory, the working directory, or the same directory where input is located

CWL workflows are written in the YAML syntax. This short tutorial explains the parts of YAML used in CWL. A CWL document contains the workflow and the requirements for running that workflow. All CWL documents should start with two lines of code:

cwlVersion: v1.2
class:

The cwlVersion string defines which standard of the language is required for the tool or workflow. The most recent version is v1.2.

The class field defines what this particular document is. The majority of CWL documents will fall into one of two classes: CommandLineTool, or Workflow. The CommandLineTool class is used for describing the interface for a command-line tool, while the Workflow class is used for connecting those tool descriptions into a workflow. In this lesson the differences between these two classes are explained, how to pass data to and from command-line tools and specify working environments for these, and finally how to use a tool description within a workflow.

You should follow the examples in this lesson from your novice-tutorial-exercises directory.

$ cd novice-tutorial-exercises

Our first CWL script

To demonstrate the basic requirements for a tool descriptor a CWL description for the popular “Hello world!” demonstration will be examined.

echo.cwl

cwlVersion: v1.2
class: CommandLineTool

baseCommand: echo

inputs:
  message_text:
    type: string
    inputBinding:
      position: 1

outputs: []

Next, the input file: hello_world.yml.

hello_world.yml

message_text: Hello world!

We will use the reference CWL runner, cwltool to run this CWL document (the .cwl workflow file) along with the .yml input file.

cwltool echo.cwl hello_world.yml
INFO Resolved 'echo.cwl' to 'file:///.../echo.cwl'
INFO [job echo.cwl] /private/tmp/docker_tmprm65mucw$ echo \
    'Hello world!'
Hello world!
INFO [job echo.cwl] completed success
{}
INFO Final process status is success

The output displayed above shows that the program has run succesfully and its output, Hello world!.

Let’s take a look at the echo.cwl script in more detail.

As explained above, the first 2 lines are always the same, the CWL version and the class of the script are defined. In this example the class is CommandLineTool, in particular the echo command. The next line, baseCommand, contains the command that will be run (echo).

inputs:
  message_text:
    type: string
    inputBinding:
       position: 1

This block of code contains the inputs section of the tool description. This section provides all the inputs that are needed for running this specific tool. To run this example we will need to provide a string which will be included on the command line. Each of the inputs has a name, to help us tell them apart; this first input has the name : message_text. The field inputBinding is one way to specify how the input should appear on the command line. Here the position field indicates at which position the input will be on the command line; in this case the message_text value will be the first thing added to the command line (after the baseCommand, echo).

outputs: []

Lastly the outputs of the tool description. This example doesn’t have a formal output. The text is printed directly in the terminal. So an empty YAML list ([]) is used as the output.

Script order

To make the script more readable the input field is put in front of the output field. However CWL syntax requires only that each field is properly defined, it does not require them to be in a particular order.

Changing input text

What do you need to change to print a different text on the command line?

Solution

To change the text on the command line, you only have to change the text in the hello_world.yml file.

For example:

message_text: Good job!

CWL single step workflow

The RNA-seq data from the introduction episode will be used for the first CWL workflow. The first step of RNA-sequencing analysis is a quality control of the RNA reads using the fastqc tool. This tool is already available to use so there is no need to write a new CWL tool description.

This is the workflow file (rna_seq_workflow.cwl).

rna_seq_workflow.cwl

cwlVersion: v1.2
class: Workflow

inputs:
  rna_reads_fruitfly: File

steps:
  quality_control:
    run: bio-cwl-tools/fastqc/fastqc_2.cwl
    in:
      reads_file: rna_reads_fruitfly
    out: [html_file]

outputs:
  quality_report:
    type: File
    outputSource: quality_control/html_file

In a workflow the steps field must always be present. The workflow tasks or steps that you want to run are listed in this field. At the moment the workflow only contains one step: quality_control. In the next episodes more steps will be added to the workflow.

Let’s take a closer look at the workflow. First the inputs field will be explained.

inputs:
  rna_reads_fruitfly: File

Looking at the CWL script of the fastqc tool, it needs a fastq file as its input. In this example the fastq file consists of Drosophila melanogaster RNA reads. So we call the variable rna_reads_fruitfly and it has File as its type. To make this workflow interpretable for other researchers, self-explanatory and sensible variable names are used.

Input and output names

It is very important to give inputs and outputs a sensible name. Try not to use variable names like inputA or inputB because others might not understand what is meant by it.

The next part of the script is the steps field.

steps:
  quality_control:
    run: bio-cwl-tools/fastqc/fastqc_2.cwl
    in:
      reads_file: rna_reads_fruitfly
    out: [html_file]

Every step of a workflow needs a name, the first step of the workflow is called quality_control. Each step needs a run field, an in field and an out field. The run field contains the location of the CWL file of the tool to be run. The in field connects the inputs field to the fastqc tool. The fastqc tool has an input parameter called reads_file, so it needs to connect the reads_file to rna_reads_fruitfly. Lastly, the out field is a list of output parameters from the tool to be used. In this example, the fastqc tool produces an output file called html_file.

The last part of the script is the output field.

outputs:
  quality_report:
    type: File
    outputSource: quality_control/html_file

Each output in the outputs field needs its own name. In this example the output is called qc_html. Inside qc_html the type of output is defined. The output of the quality_control step is a file, so the qc_html type is File. The outputSource field refers to where the output is located, in this example it came from the step quality_control and it is called html_file.

When you want to run this workflow, you need to provide a file with the inputs the workflow needs. This file is similar to the hello_world.yml file in the previous section. The input file is called workflow_input.yml

workflow_input.yml

rna_reads_fruitfly:
  class: File
  location: rnaseq/GSM461177_2_subsampled.fastqsanger
  format: http://edamontology.org/format_1930  # FASTA

In the input file the values for the inputs that are declared in the inputs section of the workflow are provided. The workflow takes rna_reads_fruitfly as an input parameter, so we use the same variable name in the input file. When setting inputs, the class of the object needs to be defined, for example class: File or class: Directory. The location field contains the location of the input file, in this case it is a local path, but we could have directly used the original url location: https://zenodo.org/record/4541751/files/GSM461177_2_subsampled.fastqsanger In this example the last line is needed to provide a format for the fastq file.

Now you can run the workflow using the following command:

cwltool rna_seq_workflow.cwl workflow_input.yml
...
Analysis complete for GSM461177_2_subsampled.fastqsanger
INFO [job quality_control] Max memory used: 179MiB
INFO [job quality_control] completed success
INFO [step quality_control] completed success
INFO [workflow ] completed success
{
    "quality_report": {
        "location": "file:///.../GSM461177_2_subsampled.fastqsanger_fastqc.html",
        "basename": "GSM461177_2_subsampled.fastqsanger_fastqc.html",
        "class": "File",
        "checksum": "sha1$e820c530b91a3087ae4c53a6f9fbd35ab069095c",
        "size": 378324,
        "path": "/.../GSM461177_2_subsampled.fastqsanger_fastqc.html"
    }
}
INFO Final process status is success

Exercise

Needs some exercises

Key Points

  • A tool description describes the interface to a command line tool.

  • A workflow describes which command line tools to use in one or more steps.

  • A tool descriptor is defined using the ComandLineTool class.

  • FIXME: How can we use a tool descriptor in a single step workflow?


Developing Multi-Step Workflows

Overview

Teaching: 0 min
Exercises: 0 min
Questions
  • How can we expand to a multi-step workflow?

  • Iterative workflow development

  • Workflows as dependency graphs

  • How to use sketches for workflow design?

Objectives
  • explain that a workflow is a dependency graph

  • use cwlviewer online

  • generate Graphviz diagram using cwltool

  • exercise with the printout of a simple workflow; draw arrows on code; hand draw a graph on another sheet of paper

  • recognise that workflow development can be iterative i.e. that it doesn’t have to happen all at once

  • understand the flow of data between tools

Multi-Step Workflow

In the previous episode a single step workflow was shown. To make a multi-step workflow, you add more entries to the steps field. In this episode, the workflow is extended with the next two steps of the RNA-sequencing analysis. The next two steps are triming the reads and alignment of the trimmed reads. We will be using the cutadapt and STAR tools for these tasks.

rna_seq_workflow.cwl

cwlVersion: v1.2
class: Workflow

inputs:
  rna_reads_forward:
    type: File
    format: https://edamontology.org/format_1930  # FASTQ
  rna_reads_reverse:
    type: File
    format: https://edamontology.org/format_1930  # FASTQ
  ref_genome: Directory
  gene_model: File

steps:
  quality_control_forward:
    run: bio-cwl-tools/fastqc/fastqc_2.cwl
    in:
      reads_file: rna_reads_forward
    out: [html_file]

  quality_control_reverse:
    run: bio-cwl-tools/fastqc/fastqc_2.cwl
    in:
      reads_file: rna_reads_reverse
    out: [html_file]

  trim_low_quality_bases:
    run: bio-cwl-tools/cutadapt/cutadapt-paired.cwl
    in:
      reads_1: rna_reads_forward
      reads_2: rna_reads_reverse
      minimum_length: { default: 20 }
      quality_cutoff: { default: 20 }
    out: [ trimmed_reads_1, trimmed_reads_2, report ]

  mapping_reads:
    requirements:
      ResourceRequirement:
        ramMin: 9000
    run: bio-cwl-tools/STAR/STAR-Align.cwl
    in:
      RunThreadN: {default: 4}
      GenomeDir: ref_genome
      ForwardReads: trim_low_quality_bases/trimmed_reads_1
      ReverseReads: trim_low_quality_bases/trimmed_reads_2
      OutSAMtype: {default: BAM}
      SortedByCoordinate: {default: true}
      OutSAMunmapped: {default: Within}
      Overhang: { default: 36 }  # the length of the reads - 1
      Gtf: gene_model
    out: [alignment]


outputs:
  alignments:
    type:
      - File
      - File[]
    outputSource: mapping_reads/alignment

The workflow file shows the first 3 steps of the RNA-seq analysis: quality_control, mapping_reads and index_alignment. The index_alignment step uses the alignment output of the mapping_reads step. You do this by referencing the output of the mapping_reads step in the in field of the index_alignment step. This is similar to referencing the outputs of the different steps in the outputs section.

The mapping_reads step needs some extra information beyond the inputs from the other steps, which is done by providing default values. If you want, you can read the bio-cwl-tools/STAR/STAR-Align.cwl file to see how these extra inputs are transformed into command line options to the STAR program. This information is provided in the in field.

To run the tool better, it needs more RAM than the default. So there is a requirements entry inside the mapping_reads step definition with a ResourceRequirement to allocate a minimum of 9000 MiB of RAM.

The newly added mapping_reads step also need an input not provided by any of our other steps, therefore an additional workflow-level input is added: a directory that contains the reference genome necessary for the mapping.

This ref_genome is added in the inputs field of the workflow and in the YAML input file, workflow_input.yml.

workflow_input.yml

rna_reads_forward:
  class: File
  location: rnaseq/GSM461177_1_subsampled.fastqsanger
  format: https://edamontology.org/format_1930  # FASTQ
rna_reads_reverse:
  class: File
  location: rnaseq/GSM461177_2_subsampled.fastqsanger
  format: https://edamontology.org/format_1930  # FASTQ
ref_genome:
  class: Directory
  location: rnaseq/dm6-STAR-index
gene_model:
  class: File
  location: rnaseq/Drosophila_melanogaster.BDGP6.87.gtf

Exercise

Draw the connecting arrows in the following graph of our workflow. Also, provide the outputs/inputs of the different steps. You can use for example Paint or print out the graph.

Solution

To find out how the inputs and the steps are connected to each other, you look at the in field of the different steps.

Iterative working

Working on a workflow is often not something that happens all at once. Sometimes you already have a shell script ready that can be converted to a CWL workflow. Other times it is similar to this tutorial, you start with a single-step workflow and extend it to a multi-step workflow. This is all iterative working, a continuous work in progress.

Visualising a workflow

A CWL workflow is a directed acyclic graph (DAG). This means that:

  1. The workflow has a certain direction, from workflow inputs to step inputs, from step outputs to other step inputs, and from step outputs to workflow outputs and
  2. The workflow definition has no cycles. A CWL workflow is a dependency graph. Each input for a step in the workflow depends on either a workflow-level input or a particular output from another step.

To visualise a workflow, a graph can be used. This can be done before a CWL script is written to visualise how the different steps connect to each other. It is also possible to make a graph after the CWL script has been written. This graph can be generated using online tools or the build-in function in cwltool. When a graph is generated, it can be used to visualise the steps taken and could make it easier to explain a workflow to other researchers.

From CWL script to graph

In this example the workflow is already made, so the graph can be generated using cwlviewer online or using cwltool. First, let’s have a look at cwlviewer. To use this tool, the workflow has to be put in a GitHub, GitLab or Git repository. To view the graph of the workflow enter the URL and click Parse Workflow. The cwlviewer displays the workflow as a graph, starting with the input. Then the different steps are shown, each with their input(s) and output(s). The steps are linked to eachother using arrows accompanied by the input of the next step. The graph ends with the workflow outputs.

The graph of the RNA-seq workflow looks a follows:

It is also possible to generate the graph in the command line. cwltool has a function that makes a graph. The --print-dot option will print a file suitable for Graphviz dot program. This is the command to generate a Scalable Vector Graphic (SVG) file:

cwltool --print-dot rna_seq_workflow.cwl | dot -Tsvg > workflow_graph.svg

The resulting SVG file displays the same graph as the one in the cwlviewer. The SVG file can be opened in any web browser and in Inkscape, for example.

Visualisation in VSCode

Benten is an extension in Visual Studio Code (VSCode) that among other things visualises a workflow in a graph. When Benten is installed in VSCode, the tool can be used to visualise the workflow. In the top-right corner of the VSCode window the CWL viewer can be opened, see the screenshot below.

In VSCode/Benten the inputs are shown in green, the steps in blue and the outputs in yellow. This graph looks a little bit different from the graph made with cwlviewer or cwltool. The graph by VSCode/Benten doesn’t show the output-input names between the different steps.

Key Points

  • A multi-step workflow has multiple entries under the steps section

  • Workflow development can be an iterative process

  • A CWL workflow can be represented as a dependency graph, either to explain your workflow or as a planning tool


Resources for Reusing Tools and Scripts

Overview

Teaching: 0 min
Exercises: 0 min
Questions
  • How to find other solutions/CWL recipes for awkward problems?

Objectives
  • Know good resources for finding solutions to common problems

Pre-written tool descriptions

When you start a CWL workflow, it is recommended to check if there is already a CWL document available for the tools you want to use. Bio-cwl-tools is a library of CWL documents for biology/life-sciences related tools.

The CWL documents of the previous steps were already provided for you, however, you can also find them in this library. In this episode you will use the bio-cwl-tools library to add the last step to the workflow.

Adding new step in workflow

The last step of our workflow is counting the RNA-seq reads for which we will use the featureCounts tool.

Exercise

Find the featureCounts tool in the bio-cwl-tools library. Have a look at the CWL document. Which inputs does this tool need? And what are the outputs of this tool?

Solution

The featureCounts CWL document can be found in the GitHub repo; it has 2 inputs: annotations (line 6) and mapped_reads, both files. These inputs can be found on lines 6 and 9. The output of this tool is a file called featurecounts (line 21).

We need a local copy of featureCounts in order to use it in our workflow. We already imported this as a git submodule during setup, so the tool should be located at bio-cwl-tools/subread/featureCounts.cwl.

Exercise

Add the featureCounts tool to the workflow. Similar to the STAR tool, this tool also needs more RAM than the default. To run the tool a minimum of 500 MiB of RAM is needed. Use a requirements entry with ResourceRequirement to allocate a ramMin of 500. Use the inputs and output of the previous exercise to connect this step to previous steps.

Solution

cwlVersion: v1.2
class: Workflow

inputs:
  rna_reads_forward:
    type: File
    format: https://edamontology.org/format_1930  # FASTQ
  rna_reads_reverse:
    type: File
    format: https://edamontology.org/format_1930  # FASTQ
  ref_genome: Directory
  gene_model: File

steps:
  quality_control_forward:
    run: bio-cwl-tools/fastqc/fastqc_2.cwl
    in:
      reads_file: rna_reads_forward
    out: [html_file]

  quality_control_reverse:
    run: bio-cwl-tools/fastqc/fastqc_2.cwl
    in:
      reads_file: rna_reads_reverse
    out: [html_file]

  trim_low_quality_bases:
    run: bio-cwl-tools/cutadapt/cutadapt-paired.cwl
    in:
      reads_1: rna_reads_forward
      reads_2: rna_reads_reverse
      minimum_length: { default: 20 }
      quality_cutoff: { default: 20 }
    out: [ trimmed_reads_1, trimmed_reads_2, report ]

  mapping_reads:
    requirements:
      ResourceRequirement:
        ramMin: 9000
    run: bio-cwl-tools/STAR/STAR-Align.cwl
    in:
      RunThreadN: {default: 4}
      GenomeDir: ref_genome
      ForwardReads: trim_low_quality_bases/trimmed_reads_1
      ReverseReads: trim_low_quality_bases/trimmed_reads_2
      OutSAMtype: {default: BAM}
      SortedByCoordinate: {default: true}
      OutSAMunmapped: {default: Within}
      Overhang: { default: 36 }  # the length of the reads - 1
      Gtf: gene_model
    out: [alignment]

  index_alignment:
    run: bio-cwl-tools/samtools/samtools_index.cwl
    in:
      bam_sorted: mapping_reads/alignment
    out: [bam_sorted_indexed]

  count_reads:
    requirements:
      ResourceRequirement:
        ramMin: 500
    run: bio-cwl-tools/subread/featureCounts.cwl
    in:
      mapped_reads: index_alignment/bam_sorted_indexed
      annotations: gene_model
    out: [featurecounts]

outputs:
  bam_sorted_indexed:
    type: File
    outputSource: index_alignment/bam_sorted_indexed
  featurecounts:
    type: File
    outputSource: count_reads/featurecounts

The workflow is complete and we only need to complete the YAML input file. The last entry in the input file is the annotations file.

workflow_input.yml

rna_reads_forward:
  class: File
  location: rnaseq/GSM461177_1_subsampled.fastqsanger
  format: https://edamontology.org/format_1930  # FASTQ
rna_reads_reverse:
  class: File
  location: rnaseq/GSM461177_2_subsampled.fastqsanger
  format: https://edamontology.org/format_1930  # FASTQ
ref_genome:
  class: Directory
  location: rnaseq/dm6-STAR-index
gene_model:
  class: File
  location: rnaseq/Drosophila_melanogaster.BDGP6.87.gtf
  format: https://edamontology.org/format_2306

You have finished the workflow and the input file and now you can run the whole workflow.

cwltool rna_seq_workflow.cwl workflow_input.yml

Key Points

  • bio-cwl-tools is a library of CWL documents for biology/life-sciences related tools


Debugging Workflows

Overview

Teaching: 0 min
Exercises: 0 min
Questions
  • How can I check my CWL file for errors?

  • How can I get more information to help with solving an error?

  • What are some common error messages when using CWL?

Objectives
  • Check a CWL file for errors

  • Output debugging information

  • Interpret and fix commonly encountered error messages

When working on a CWL workflow, you will probably encounter errors. There are many different errors possible. It is always very important to check the error message in the terminal, because it will give you information on the error. This error message will give you the type of error as well as the line of code that contains the error. Some of these errors will be explained in this episode.

As a first step to check if your CWL script contains any errors, you can run the workflow with the --validate flag.

cwltool --validate CWL_SCRIPT.cwl

It is possible that the script is validated, however, it still gets an error. If you encounter an error, the best practice is to run the workflow with the --debug flag. This will provide you with extensive information on the error you encounter.

cwltool --debug CWL_SCRIPT.cwl

YAML errors

First of all, errors in the YAML syntax. When writing a piece of code, it is very easy to make a mistake.

Some very common YAML errors are:

Wiring error

Wiring errors often occur when you forget to add an output from a workflow’s step to the outputs section. This doesn’t cause an error message, but there won’t be any output in your directory. To get the desired output you have to run the workflow again. Best practice is to check your outputs section before running your script to make sure all the outputs you want are there.

Type mismatch

Type errors take place when there is a mismatch in type between variables. When you declare a variable in the inputs section, the type of this variable has to match the type in the YAML inputs file and the type used in one of the workflows steps. The error message that is shown when this error occurs will tell you on which line the mismatch happens.

cwlVersion: v1.2
class: Workflow

inputs:
  rna_reads_human: int
  ref_genome: Directory
  annotations: File

steps:
  quality_control:
    run: bio-cwl-tools/fastqc/fastqc_2.cwl
    in:
      reads_file: rna_reads_human
    out: [html_file]

  mapping_reads:
    requirements:
      ResourceRequirement:
        ramMin: 9000
    run: bio-cwl-tools/STAR/STAR-Align.cwl
    in:
      RunThreadN: {default: 4}
      GenomeDir: ref_genome
      ForwardReads: rna_reads_human
      OutSAMtype: {default: BAM}
      SortedByCoordinate: {default: true}
      OutSAMunmapped: {default: Within}
    out: [alignment]

  index_alignment:
    run: bio-cwl-tools/samtools/samtools_index.cwl
    in:
      bam_sorted: mapping_reads/alignment
    out: [bam_sorted_indexed]

  count_reads:
    requirements:
      ResourceRequirement:
        ramMin: 500
    run: bio-cwl-tools/subread/featureCounts.cwl
    in:
      mapped_reads: index_alignment/bam_sorted_indexed
      annotations: annotations
    out: [featurecounts]

outputs:
  qc_html:
    type: File
    outputSource: quality_control/html_file
  bam_sorted_indexed:
    type: File
    outputSource: index_alignment/bam_sorted_indexed
  featurecounts:
    type: File
    outputSource: count_reads/featurecounts
$ cwltool rna_seq_workflow.cwl workflow_input.yml
ERROR Tool definition failed validation:

rna_seq_workflow.cwl:5:3:   Source 'rna_reads_human' of type "int" is incompatible
rna_seq_workflow.cwl:24:7:   with sink 'ForwardReads' of type ["File", {"type": "array", "items":
                             "File"}]
rna_seq_workflow.cwl:5:3:   Source 'rna_reads_human' of type "int" is incompatible
rna_seq_workflow.cwl:13:7:   with sink 'reads_file' of type ["File"]

Format error

Some files need a specific format that needs to be specified in the YAML inputs file, for example the fastq file in the RNA-seq analysis. When you don’t specify a format, an error will occur. You can for example use the EDAM ontology.

rna_reads_human:
  class: File
  location: rnaseq/raw_fastq/Mov10_oe_1.subset.fq
ref_genome:
  class: Directory
  location: rnaseq/hg19-chr1-STAR-index
annotations:
  class: File
  location: rnaseq/reference_data/chr1-hg19_genes.gtf
$ cwltool rna_seq_workflow.cwl workflow_input.yml
ERROR Exception on step 'mapping_reads'
ERROR [step mapping_reads] Cannot make job: Expected value of 'ForwardReads' to have format http://edamontology.org/format_1930 but
  File has no 'format' defined: {
    "class": "File",
    "location": "file:///home/mbexegc2/Documents/projects/bioexcel/follow-cwl-novice-tutorial/novice-tutorial-exercises/rnaseq/raw_fastq/Mov10_oe_1.subset.fq",
    "size": 75706556,
    "basename": "Mov10_oe_1.subset.fq",
    "nameroot": "Mov10_oe_1.subset",
    "nameext": ".fq"
}

Key Points

  • Run the workflow with the --validate option to check for errors

  • The --debug option will output more information

  • ‘Wiring’ errors won’t necessarily yield an error message


More information

Overview

Teaching: min
Exercises: min
Questions
Objectives

If you want to know more about CWL script and workflows, you can look at one of these websites:

Key Points